Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 104)

4-72 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
Selects whether the signed value or absolute value of a parameter is used before
being scaled to drive the analog output.
Selects the source of the value that drives the analog output.
341 Anlg Out Absolut
Range: See figure 4.32
Default: See figure 4.32
Access: 1 Path: Inputs & Outputs>Analog Outputs
See also: 342
Figure 4.32 – Anlg Out Absolute (341)
x x x 0 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
Analog Out1
Nibble 1 Nibble 2 Nibble 3 Nibble 4
342 Analog Out1 Sel
Range: 0 = Output Freq
1 = Command Freq
2 = Output Amps
3 = Torque Amps
4 = Flux Amps
5 = Output Power
6 = Output Volts
7 = DC Bus Volts
8 = PI Reference
9 = PI Feedback
10 = PI Error
11 = PI Output
12 = %Motor OL
13 = %Drive OL
14 = Application
Default: 0 = Output Freq
Access: 0 Path: Inputs & Outputs>Analog Outputs
See also: 1 - 7, 12, 135 - 138, 219, 220