Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 30)

3-4 LiquiFlo 1.5 AC Drive, Software Reference Version 2.1
3.3.1 Selecting the Parameter Access Level
The LiquiFlo 1.5 AC drive provides two levels of access to the parameters: Basic (0)
and Advanced (1).
The Advanced level allows access to all of the parameters.
The Basic level allows access to a subset of the Standard level and contains only the
most commonly used parameters. See Appendix B for a list of the parameters
available at the Basic level.
The active access level is displayed in Parameter Access Level (196).
To select the parameter access level using the LCD OIM, select the Password icon
from the main menu. See figure 3.3.
This option is not supported in the VS Utilities software.
Figure 3.3 – Selecting the Parameter Access Level
Auto Stopped
Main Menu
Password
P0: LiquiFlo 1.5
Password:
Set Acc Lvl PW
Set Wrt Prot PW
Set Access Lvl
Highlight Password icon
Password:
Advanced
Select
Highlight option
Monitor Lang
>>
Basic