Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 114)

4-82 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
Sets the relay activation level for options 10-15 in Digital Out”x” Sel. Units are
assumed to match the above selection (i.e., At Freq = Hz, At Torque = Amps).
Sets the on delay time for the digital outputs. This is the time between the occurrence
of a condition and activation of the relay
Sets the off delay time for the digital outputs. This is the time between the
disappearance of a condition and de-activation of the relay.
385 Dig Out2 Level
Range: 0.0 to 819.2 [0.1]
Default: 0.0
Access: 0 Path: Inputs & Output>Digital Outputs
See also: 384
386 Dig Out2 OnTime
Range: 0.00 to 600.00 sec [0.01 sec]
Default: 0.00 sec
Access: 1 Path: Inputs & Output>Digital Outputs
See also: 384
387 Dig Out2 OffTime
Range: 0.00 to 600.00 sec [0.01 sec]
Default: 0.00 sec
Access: 1 Path: Inputs & Output>Digital Outputs
See also: 384