Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 122)

 

5-24 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Define Thresholds for a Digital Input Module
To define your own threshold values do the following:
1) Select the Thresholds tab on the module editor.

A set of default values is shown in the threshold fields.
2) To enter your own values select the Use Custom Thresholds box, enter your
own values in the threshold fields, click Apply.
3) To restore the default values, Click Default then de-select the Use Custom
Thresholds, click Apply.