Rockwell Automation 2755-DM9, -DM9E High Speed Decoder - Manual (Page 52)

Chapter 4
Configuring Your Decoder
4–25
Reference
Letter
Description
Field
Type
Options (Select Field
Only)
Valid Entries (Edit Field
Only)
j Specified code lengths for Interleaved
2–of–5. Includes check character. Edit N/A Even numeric entries from
0 through 64. 0 indicates
no length check. Must be
even number.
k Specified code lengths for Code 128.
Does not include start, stop, or check
characters. Edit N/A Numeric entries from 0
through 64. 0 indicates no
length check.
l Specified code lengths for Codabar.
Includes start, stop, and check
characters. Edit N/A Numeric entries from 0
through 64. 0 indicates no
length check.
m Laser–On mode select. Select Continuous or
Triggered. N/A
n Trigger select. Select Package Detect, Host
Command, Internal
Timer, Continuous. N/A
o Capture count. Edit N/A Numeric value from 1
through 8.
p Number of bar code fields per scan. Select 1, 2, 3, 4 or Any N/A
q Number of bar code fields per package. Edit N/A Numeric value from 1
through 8.
r No–read timer (milliseconds). Edit N/A Numeric value from 10
through 9999. 0 indicates
no timer.
s Inter–scan timer (milliseconds). Edit N/A Numeric value from 10
through 9999. 0 indicates
no timer.
t Match complete count. Edit N/A Numeric value from 1
through 8.
u Bar code symbology for match code
operation. Select Code 39,
Interleaved 2–of–5,
Code 128,
Codabar,
UPC–A,
UPC–E,
EAN–8,
EAN–13 N/A
v Enable for match code operation. Select Y or N N/A