Rockwell Automation 2755-DM9, -DM9E High Speed Decoder - Manual (Page 10)

Chapter 1
Using this Manual
1–3
Both warnings and cautions are found in this manual and on the equipment.
The following symbols are used:
WARNING: A warning symbol means people might be
injured if the procedures are not followed.
CAUTION: A caution symbol is used when machinery could
be damaged if the procedures are not followed.
This manual may contain some terms that you are not familiar with. We
have provided a glossary of terms at the back of this manual (Appendix G) to
assist you.
The following table lists related publications that you may require to install
and operate the decoder.
Description Title Purpose of Publication
Catalog Number
2755-ND002 ②
User’s Manual for Bulletin 2755 Industrial
Medium and High Speed Bar Code
Scanners.
Provides information on the Catalog Number
2755-L7 and -L9 scan heads
① .
Publication 2755-829 ②
User’s Manual for Bulletin 2755 Enhanced
Medium Speed Scan Heads
Provides information on the Catalog Number
2755-L4F and -L4R enhanced scan heads
① .
Publication 2755-826 ②
User’s Manual for Bulletin 2755 Medium
Speed Material Handling Scanners
Provides information on the Catalog Number
2755-L4F and -L4R scan heads
① .
Publication 2755-801 ②
User’s Manual for Bulletin 2755 Modular
Bar Code Scanners Provides information on the Catalog Number
2755-L4 and -L5 scan heads
① .
Publication 2760-812
User’s Manual for Bulletin 2760–RB
Flexible Interface Module Provides information on the Catalog Number
2760-RB Flexible Interface Module.
Publication 2760-822
Protocol Cartridge Programming Manual Provides instruction on using the RS-232/RS-422
protocol cartridge for the 2760-RB module.
Publication 2760-823
Protocol Cartridge Programming Manual Provides instruction on using the RS-485
protocol cartridge for the 2760-RB module.
Publication
1771-6.5.34
BASIC Module User’s Manual Provides information on the Catalog Number
1771-DB BASIC module.
Publication
1771-6.5.15
User’s Manual for 1771–KE and 1771–KF Provides information on the Catalog Number
1771-KE and -KF Communications Controllers.
Publication
1771-6.5.13
ASCII I/O Module User’s Manual Provides information on the Catalog Number
1771-DA ASCII I/O module.
① We have provided only a partial catalog number since there are various configurations available for these scan heads.
②
Additional scan heads may be available for use with the Catalog Number 2755-DM9 decoder. Refer to your Allen-Bradley representative for more information.
Warnings And Cautions
Nomenclature
Related Publications