Rockwell Automation 1746-HSCE,D17466.5 High-Speed Counter Module - Manual (Page 82)

Publication 1746-UM006B-EN-P - August 2005
4-22 Configuration and Programming
I:e.4 Bits 0 through 7 - Configuration Error Code
I:e.4 Bits 8 through 15 - Output Status
These bits reflect the current state of both the Soft and Physical
Outputs. If the Enable Output bit (M0:e.1/1) is false or if the processor
is not in run mode, the Physical Outputs are not active.
Bits 8-11 represent the Physical Outputs 0-3. Bits 12-15 represent the
Soft Outputs 4-7.
I:e.5 Reserved
Configuration
Error Code Reason Critical
Error Action
Hex Binary
01 0000 0001 not defined -
reconfigure
(1)
(1) The Function Control bit must be reset to 0, the parameter must be changed, and the Function Control bit is
then set to 1 .
02 0000 0010 max count = 0 (ring) yes
reconfigure
(1)
03 0000 0011 invalid operating mode yes
reconfigure
(1)
04 0000 0100 invalid input type yes
reconfigure
(1)
05 0000 0101 static parameter changed yes
reconfigure
(1)
06 0000 0110 ranges active = 0 no change parameter
07 0000 0111 rate period = 0 no change parameter
08 0000 1000 linear counter reset value out of range no change parameter
09 0000 1001 sequencer preset > max. count no change parameter