Rockwell Automation 1746-HSCE,D17466.5 High-Speed Counter Module - Manual (Page 124)

Publication 1746-UM006B-EN-P - August 2005
6-12 Application Examples
Starting and Ending Range Values (decimal) (page 4-12)
Reset Value/Maximum Count Value (page 4-13)
M0:e.10
M0:e.11
M0:e.12
M0:e.13
M0:e.14
M0:e.15
M0:e.16
M0:e.17
M0:e.18
M0:e.19
M0:e.20
M0:e.21
Range 1 Starting Value
Range 1 Ending Value
M0:e.22
M0:e.23
M0:e.24
M0:e25
M0:e.26
M0:e.27
M0:e.28
M0:e.29
M0:e.30
M0:e.31
M0:e.32
M0:e.33
Range 2 Starting Value
Range 3 Ending Value
Range 4 Starting Value
Range 4 Ending Value
Range 5 Starting Value
Range 5 Ending Value
Range 6 Starting Value
Range 6 Ending Value
Range 7 Starting Value
Range 7 Ending Value
Range 9 Starting Value
Range 9 Ending Value
Range 10 Starting Value
Range 10 Ending Value
Range 11 Starting Value
Range 11 Ending Value
Range 12 Starting Value
Range 12 Ending Value
Range 2 Ending Value
Range 3 Starting Value
Range 8 Starting Value
Range 8 Ending Value
0
9 4
0 5
9 4 2 0 1
2 0 1 0 5
9 9 9 9 1
1 0 0 0 0
1 9 9 9 9
1 1 0 0 0
1 9 9 9 9
slow feed
fast feed
slow feed
drill
stop
These two ranges are shown for clarity
only, they do not have to be programmed
because their output data is zero. Outputs
are reset to 0 when ranges are not active.
ATTENTION
The module will fault on power-up if you do not
enter a value.
M0:e.34
Ring counter – Maximum Count Value range is 1 to 32767 (rollover at +32767)
Linear counter – Reset Value range is –32767 to +32767.
Reset Value/Maximum Count Value 0 0 0 0 0