Rockwell Automation 1746-HSCE,D17466.5 High-Speed Counter Module - Manual (Page 62)

Publication 1746-UM006B-EN-P - August 2005
4-2 Configuration and Programming
M0 File Words - Range and
Rate Modes For more information on M0 files, refer to Appendix B. Refer to
Appendix D for Range and Rate Mode operation worksheets.
IMPORTANT
Reserved bits must be reset to 0.
R R R R R R
R
Output Source Select, Word 0
Bit Number (decimal)
Output Source Select
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M0:e.0
Setup and Control Word, Word 1
Valid Ranges, Word 2
Range 2 and Range 1 Outputs, Word 3
Range 4 and Range 3 Outputs Word 4
Range 6 and Range 5 Outputs, Word 5
Range 8 and Range 7 Outputs, Word 6
Range 10 and Range 9 Outputs, Word 7
M0:e.1
M0:e.2
M0:e.3
M0:e.4
M0:e.5
M0:e.6
M0:e.7
Range 12 and Range 11 Outputs Word 8
Rate Period, Word 9
Range 1 Starting Value, Word 10
Range 1 Ending Value, Word 11
M0:e.8
M0:e.9
M0:e.10
M0:e.11 R R R R R R R R R
Range 12 Starting Value, Word 32
Range 12 Ending Value, Word 33
M0:e.32
M0:e.33
Reset Value / Maximum Count Value, Word 34 M0:e.34
Reserved, Word 35 M0:e.35 R R R R R R R R R R R R R R R R
R R R R R R R R R R R R R R R R Reserved, Word 41 M0:e.41
Physical
Output
Patterns
Soft
Output
Patterns
R R
R R R R
R
R R
R = Reserved, must be reset to 0