Formulas for converting, Common services, Object specific services – Rockwell Automation 1769-SM2 Compact I/O DSI/Modbus Communication Module User Manual
Page 183: R to, Dsi parameter object
CIP/DSI Objects
C-13
Descriptor Attributes (Continued)
Formulas for Converting
Display Value = ((Internal Value + Offset) x Multiplier x Base) / (Divisor x 10
Decimal Places
)
Internal Value = ((Display Value x Divisor x 10
Decimal Places
) / (Multiplier x Base)) - Offset
Common Services
Object Specific Services
The table below lists the parameters for the Get_Attributes_Scattered
and Set_Attributes_Scattered object-specific service:
Important: The STRUCT may repeat up to 55 times in a single message.
DSI Parameter Object
(Continued)
Bit
Name
Description
19
Parameter Exists
Reserved
20
Not Used
Reserved
21
Formula Links
Reserved
22
Access Level (Bit 1)
Reserved
23
Access Level (Bit 2)
Reserved
24
Access Level (Bit 3)
Reserved
25
Writable ENUM
Reserved
26
Not a Link Source
0 = Parameter can be a source for a link
1 = Parameter cannot be a source for a link
27
Enhanced Bit ENUM
Reserved
28
Enhanced ENUM
Reserved
29
Not Used
Reserved
30
Not Used
Reserved
31
Not Used
Reserved
Service Code
Implemented for:
Service Name
Class
Instance
0x0E
Yes
Yes
Get_Attribute_Single
0x10
Yes
Yes
Set_Attribute_Single
Service Code
Service Name
0x32
Get_Attributes_Scattered
(1)
(1)
The instance and attribute are ignored for these services.
0x34
Set_Attributes_Scattered
(1)
Name
Data Type
Description
Scattered Parameters STRUCT of
—
Parameter Number
WORD
Parameter to read or write
Parameter Value
WORD
Parameter value to read or write (zero when reading)