Glossary – Rockwell Automation 1762-Lxxxx MicroLogix 1200 Programmable Controllers User Manual
Page 153

1
Publication 1762-UM001G-EN-P - March 2011
Glossary
The following terms are used throughout this manual. Refer to the
Allen-Bradley Industrial Automation Glossary, Publication Number AG-7.1,
for a complete guide to Allen-Bradley technical terms.
address
A character string that uniquely identifies a memory location. For example,
I:1/0 is the memory address for the data located in the Input file location
word1, bit 0.
AIC+ Advanced Interface Converter
A device that provides a communication link between various networked
devices. (Catalog Number 1761-NET-AIC.)
application
1) A machine or process monitored and controlled by a controller.
2) The use of computer- or processor-based routines for specific purposes.
baud rate
The speed of communication between devices. All devices must communicate
at the same baud rate on a network.
bit
The smallest storage location in memory that contains either a 1 (ON) or a 0
(OFF).
block diagrams
A schematic drawing.
Boolean operators
Logical operators such as AND, OR, NAND, NOR, NOT, and Exclusive-OR
that can be used singularly or in combination to form logic statements or
circuits. Can have an output response of T or F.
branch
A parallel logic path within a rung of a ladder program.
communication scan
A part of the controller’s operating cycle. Communication with other devices,
such as software running on a personal computer, takes place.