Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 206)

8–4 Using the Trend Features
Publication 1336 FORCE–5.18 ––March, 1999
You can specify how often you want the FORCE Drive to take data
samples. Data samples may be taken from 2 milliseconds apart to 30
seconds apart.
Note: The trigger condition is evaluated:
◗ at the rate of sampling whenever the sampling rate is less than
20 milliseconds.
◗ at 20 milliseconds whenever the sampling rate exceeds 20
milliseconds.
1. Select a sampling rate between 0 and 30 seconds.
2.
If you are programming
Trend:
Then enter the sample rate in:
1 Parameter 458
2 Parameter 468
3 Parameter 478
4 Parameter 488
Note: The FORCE drive will round the desired sample rate to the
nearest 2–millisecond interval.
Setting the Sampling Rate
"
"