Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 125)

4–83 Using Unscheduled Messaging
Publication 1336 FORCE–5.18 ––March, 1999
Message Operation
You can use the Trend Triggered Setup Parameter Values function to
read the list of trend set up data for the stored data file.
The following are the valid trend numbers:
This
number:
Specifies that the command is to be sent for:
4096 Trend 1
8192 Trend 2
12228 Trend 3
16384 Trend 4
The time is based on a 24–hour clock.
This field: Indicates:
Seconds
The seconds (high byte) and tenths of milliseconds
(low byte). The seconds can be between 0 and 59,
and the milliseconds can be between 0 and 99.
Minute
The number of minutes past the hour (low byte).
Valid values are 0 through 59.
Hour
The hour (high byte). Valid values are 0 through
23.
Date
The date of the month (high byte). Valid values
are 1 through 31.
Day
The day of the week (low byte), where 1 is Sunday
and 7 is Saturday.
Year
The number of the year (high byte). 1990 is
referenced as 0. Therefore, the year 1995 would
return a value of 5. Valid values are 0 through 99.
Month
The month of the year (low byte), where 1 is
January and 12 is December.
Trend Triggered Setup Parameter
Values
(continued)