Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 173)

6–31 Parameters
Publication 1336 FORCE–5.18 ––March, 1999
408 Port Enable
[Port Enable]
Port Enable indicates which ports can accept
commands listed in parameters 409 through 415.
Parameter Number 408
Parameter Type Read/Write, Non–Linkable Sink
Display Units / Drive Units Bits
Factory Default 0
Minimum Value 0
Maximum Value 0FE Hex
File – Group Communications I/O – SCANport Masks
Enums Bit 1 = Port 1 Bit 2 = Port 2 Bit 3 = Port 3 Bit 4 = Port 4
Bit 5 = Port 5 Bit 6 = Channel A Bit 7 = Channel B
409 Direction Mask
[Dir Mask]
Dir Mask controls which ports can issue
forward/reverse commands.
Parameter Number 409
Parameter Type Read/Write, Non–Linkable Sink
Display Units / Drive Units Bits
Factory Default 0
Minimum Value 0
Maximum Value 0FE Hex
File – Group Communications I/O – SCANport Masks
Enums Bit 1 = Port 1 Bit 2 = Port 2 Bit 3 = Port 3 Bit 4 = Port 4
Bit 5 = Port 5 Bit 6 = Channel A Bit 7 = Channel B
410 Start Mask
[Start Mask]
Start Mask controls which ports can issue a start
command.
Parameter Number 410
Parameter Type Read/Write, Non–Linkable Sink
Display Units / Drive Units Bits
Factory Default 0
Minimum Value 0
Maximum Value 0FE Hex
File – Group Communications I/O – SCANport Masks
Enums Bit 1 = Port 1 Bit 2 = Port 2 Bit 3 = Port 3 Bit 4 = Port 4
Bit 5 = Port 5 Bit 6 = Channel A Bit 7 = Channel B
411 Jog Mask
[Jog Mask]
Jog Mask controls which ports can issue a jog
command.
Parameter Number 411
Parameter Type Read/Write, Non–Linkable Sink
Display Units / Drive Units Bits
Factory Default 0
Minimum Value 0
Maximum Value 0FE Hex
File – Group Communications I/O – SCANport Masks
Enums Bit 1 = Port 1 Bit 2 = Port 2 Bit 3 = Port 3 Bit 4 = Port 4
Bit 5 = Port 5 Bit 6 = Channel A Bit 7 = Channel B
412 Reference Mask
[Ref Mask]
Ref Mask controls which ports can select an
alternate reference or preset speed.
Parameter Number 412
Parameter Type Read/Write, Non–Linkable Sink
Display Units / Drive Units Bits
Factory Default 0
Minimum Value 0
Maximum Value 0FE Hex
File – Group Communication I/O – SCANport Masks
Enums Bit 1 = Port 1 Bit 2 = Port 2 Bit 3 = Port 3 Bit 4 = Port 4
Bit 5 = Port 5 Bit 6 = Channel A Bit 7 = Channel B