Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 143)

Chapter
6
Publication 1336 FORCE–5.18 ––March, 1999
Parameters
Chapter 6 provides information about the following:
•
BRAM functions
•
parameter definitions
BRAM, or Battery backed up Random Access Memory (also known
as EEPROM), is memory that is retained when the power is removed
from the system. User parameters, link fault information, reference
stamp, process display information, and passwords are all stored in
BRAM. The three available BRAM functions are:
•
BRAM Store
Stores current parameter value and links to BRAM.
Note: BRAM Jumper J3 must have a jumper on EN (enable) to
store data to BRAM.
•
BRAM Recall
Updates the current values and links with parameter values and
links stored in BRAM.
•
BRAM Initialize
Writes the factory set default values and links to RAM.
Chapter Objectives
BRAM Functions
"