Rockwell Automation 20L PowerFlex 700L Frame 1X Liquid-Cooled Adjustable Frequency AC Drive User Manual
Page 56
PowerFlex 700L Frame 1X Drive Installation Instructions – Publication 20L-IN013A-EN-P – June 2009
56
Environment
(continued)
Relative Humidity:
5…95% non-condensing
Shock:
40G peak for 6 milliseconds duration (
±
3.0 ms)
Vibration:
Sinusoidal:
Random:
0.35 mm (0.014 in.) constant displacement to a
constant acceleration of 5G.
10…500 Hz, 1 octave/minute, 10 sweep cycles,
3 axes
0.05 g
2
/Hz, 10…500 Hz, 3 axes at 30 minutes per
axis
Electrical
Input Voltage:
480V RMS, +10%, -5% (operate to -50% with
reduced power, -30% minimum precharge)
Note: The PowerFlex Frame 1X drive requires a
3% input impedance.
Input Frequency Range:
47…63 Hz.
Line-to-Neutral Phase
Imbalance Tolerance:
2%
Output Voltage:
0…460V RMS at nominal 480V RMS input. Output
will be 460V RMS.
Output Frequency Range:
0…420 Hz
Switching Frequency:
4 kHz base; 2, 4, 8, 10 kHz selectable with
derating. Derating at 8 and 10 kHz.
Continuous Output Power:
100 kW (150 HP)
Continuous Output Current:
180 amps RMS
Peak Output Current:
3 seconds Maximum:
1 minute:
270 amps RMS (3 seconds per 60 seconds)
198 amps RMS (1 minute per 10 minutes)
Efficiency at Maximum Power,
Nominal Voltage:
> 97.5%
Power Loss at Full Load:
1900 W at 100 kW
Power Loss to Air:
200 W at 110 kW
Control
Method:
Sine-coded PWM with programmable carrier
frequency.
Carrier Frequency:
2…10 kHz. Drive rating based on 4 kHz.
for more
information.
Output Voltage Range:
0…rated motor voltage
Output Frequency Range:
0…420 Hz
Frequency Accuracy
Digital Input:
Analog Input:
Within ± 0.01% of set output frequency.
Within ± 0.4% of maximum output frequency
Frequency Control:
Speed Regulation - with Slip Compensation (Volts
per Hertz Mode)
0.5% of base speed across 40:1 speed range
40:1 operating range
10 rad/sec bandwidth
Speed Regulation - with Slip Compensation
(Sensorless Vector Mode)
0.5% of base speed across 80:1 speed range
80:1 operating range
20 rad/sec bandwidth
Speed Regulation - with Feedback (Sensorless
Vector Mode)
0.1% of base speed across 80:1 speed range
80:1 operating range
20 rad/sec bandwidth
Category
Specification