Rockwell Automation 20L PowerFlex 700L Frame 1X Liquid-Cooled Adjustable Frequency AC Drive - Manual (Page 47)

PowerFlex 700L Frame 1X Drive Installation Instructions – Publication 20L-IN013A-EN-P – June 2009
47
Alarm No. Ty
p
e
(1
)
(1) See the PowerFlex 700 Series B User Manual for a description of alarm types.
Description
Dig In
ConflictA 17 ➁ Digital input functions are in conflict. Combinations marked with a “ ” will
cause an alarm.
Dig In
ConflictB 18 ➁ A digital Start input has been configured without a Stop input or other
functions are in conflict. Combinations that conflict are marked with a “ ” and
will cause an alarm.
Dig In
ConflictC 19 ➁ More than one physical input has been configured to the same input function.
Multiple configurations are not allowed for the following input functions:
Forward/Reverse Run Reverse Bus Regulation Mode B
Speed Select 1 Jog Forward Acc2 / Dec2
Speed Select 2 Jog Reverse Accel 2
Speed Select 3 Run Decel 2
Run Forward Stop Mode B
TB Man Ref
Cflct 30 ➁ Occurs when:
• “Auto/Manual” is selected (default) for Parameter 363 [Digital In3 Sel]
and
• Parameter 096 [TB Man Ref Sel] has been reprogrammed.
No other use for the selected analog input may be programmed.
Example: If Parameter 096 [TB Man Ref Sel] is reprogrammed to “2” (Analog
In 2), all of the factory default uses for Analog In 2 must be reprogrammed
(such as Parameters 90, 117, 128 and 179). Refer to the Auto/Manual
Examples section of the PowerFlex 700 Series B User Manual.
To correct:
• Verify/reprogram the parameters that reference an analog input
or
• Reprogram Parameter 363 [Digital In3 Sel] to another function or “0” (Not
Used).
Acc2/Dec2 Accel 2 Decel 2 Jog 1/2 Jog Fwd Jog Rev Fwd/Rev
Acc2/Dec2
Accel 2
Decel 2
Jog 1/2
Jog Fwd
Jog Rev
Fwd/Rev
Start Stop-CF Run Run Fwd Run Rev Jog 1/2 Jog Fwd Jog Rev Fwd/Rev
Start
Stop-CF
Run
Run Fwd
Run Rev
Jog 1/2
Jog Fwd
Jog Rev
Fwd/Rev