Disabling password protection – Rockwell Automation 20-HIM-C6S PowerFlex (Human Interface Module) User Manual
Page 59
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
59
Using the HIM
Chapter 4
Disabling Password Protection
1.
Access the Status screen (see
Figure 6
).
2.
If Port 00 (host drive) is not shown above the ESC
soft key, use the
or
key to scroll to Port 00.
3.
Press the
key to display its last-viewed folder.
4.
Use the
or
key to scroll to the PROPERTIES folder.
5.
Use the
or
key to select Log In.
6.
Press the
(Enter) key to display the Enter Password pop-up box.
7.
Use the numeric keys to enter the existing password value.
Use the
soft key to delete an erroneous entry.
8.
Press the ENTER
soft key to enter the existing password.
9.
Use the
or
key to select Change Password.
10.
Press the
(Enter) key to display the Enter New Password pop-up box.
11.
Use the numeric keys and the
soft key to enter ‘0’, the default value to
disable the password protection feature.
12.
Press the ENTER
soft key to enter the ‘0’ (disable) default value.
13.
After the password protection verification pop-up box appears, confirm
the new password by re-entering ‘0’.
14.
Press the ENTER soft key to disable password protection.
ESC
ENTER
Stopped
0.00 Hz
AUTO
F
Enter Password
0
0 << 65535
ESC
ENTER
Stopped
0.00 Hz
AUTO
F
Enter New Password
0
0 << 65535