Opticon H22 - Manual (Page 99)

H-22 User Manual
99
13. Bluetooth
This chapter instructs you how to set up a Bluetooth connection for sending information over a
WPAN or Wireless Personal Area Network.
13.1. Bluetooth Modes
There are three Bluetooth operational modes:
On Bluetooth is enabled and your device can send and receive information with other
Bluetooth devices in range.
Off Bluetooth is disabled and can neither send nor receive information.
Visible Bluetooth is enabled and visible to all other Bluetooth devices in range.
13.2. Enabling Bluetooth
1. Tap > Settings > Bluetooth > Mode.
2. Select the check box in front of Turn on Bluetooth. See below left.
3. Tap OK to save and exit.
Figure 102. Turn on Bluetooth
Figure 103. Device Discove
able
13.3. Making Your Device Discoverable
To allow other Bluetooth devices to detect your device and send you information, follow these steps:
1. Tap > Settings > Bluetooth > Mode.
2. Select the check box in front of Make this device visible to other devices
3. Tap OK to save and exit.
Opticon
22 User Manual
This chapter instructs you how to set up a Bluetooth connection for sending information over a
is enabled and your device can send and receive information with other
Bluetooth is disabled and can neither send nor receive information.
Bluetooth is enabled and visible to all other Bluetooth devices in range.
Device Discover-
To allow other Bluetooth devices to detect your device and send you information, follow these steps:
le to other devices. See above right.