Opticon H22 - Manual (Page 84)

84
7. Tap OK
8.4. Activate a network configuration
1. Tap >Settings>Connections >WiFi CCX
2. Tap the Config tab
3. Select the desired configuration
4. Tap Activate
9. USB connection
9.1. USB function and host
H22 has a USB client interface supporting USB 2.0 high speed and a USB host interface (using a
USB host adapter) supporting USB Full speed. The USB host function in H22 sup
features:
•
Ethernet Cradle RNDIS driver
•
USB Mass storage
•
USB HID (USB keyboard only, mouse is not supported)
•
The USB client mode is configured by the USB to PC settings found in the control panel
application “USB to PC”, see below
9.2. USB to PC settings
There is a view to set up the proper USB connection type when connected to a PC:
•
ActiveSync over USB Serial
H22 has a USB client interface supporting USB 2.0 high speed and a USB host interface (using a
H22 supports the following
found in the control panel
to set up the proper USB connection type when connected to a PC: