Opticon H22 - Manual (Page 107)

H-22 User Manual
107
necessary to keep the current state of the device. The user may remove the battery to replace it with
another battery as soon as the display has been turned off. During the battery change the system
power is supplied from a Li-ion cell dedicated for the hot swap functionality. The system state can be
sustained without main battery for up to 3 minutes without data loss. When a new battery is inserted
and the battery lid is closed the device can be woken by pressing the power key. The device will be
in the same state as when the battery lid was removed. H22 measures the charge status of the
backup battery and ports it through the battery control panel applet. The charging status is either
“Good” or “Not Good”. In case the backup battery status is indicated as “Not Good” a
not be performed since it might result in loss of user data. The backup battery is automatically
charged from the main battery as soon as the main battery is present in H22.
To check backup battery status:
1.
Tap > Settings > System > Power.
2. Select the Battery tab.
3. If the backup battery status is “Good” a hot swap is possible
NOTE: Any ongoing activity such as data transfer or voice call will be broken during
transfers and similar activities have to be restarted after a hot swap.
NOTE: Before performing a hot swap, check that the backup battery status is OK
panel.
Opticon
22 User Manual
current state of the device. The user may remove the battery to replace it with
another battery as soon as the display has been turned off. During the battery change the system
The system state can be
sustained without main battery for up to 3 minutes without data loss. When a new battery is inserted
and the battery lid is closed the device can be woken by pressing the power key. The device will be
H22 measures the charge status of the
applet. The charging status is either
“Good” or “Not Good”. In case the backup battery status is indicated as “Not Good” a Hot swap must
The backup battery is automatically
charged from the main battery as soon as the main battery is present in H22.
: Any ongoing activity such as data transfer or voice call will be broken during hot swap. Data
is OK in battery control