INFICON Guardian EIES Controller - Manual (Page 57)

3 - 5
IP
N 07
4-
51
7-
P1
D
Guardian Co-Deposition Controller Operating Manual
3.3 Main Screen
The EIES main screen, see Figure 3-5 , consists of three panels and a menu bar.
The Status Panel (top) displays information on the active process. The Control
Panel (left) controls operation of the EIES-IV Guardian system. The Readings
Panel displays readings from each of the channels used by the active process
layer. Finally, the menu bar provides access to process recipe and instrument
setup functions.
Figure 3-5 EIES Main Screen
3.3.1 Status Panel
Figure 3-6 Status Panel
Process: Name of the current process. Select the active process from the menu
File, Open Process.
Process Time: The accumulated time for this run of the selected process. Resets
to zero, then starts counting when the Start button is clicked.
Process Run: The number of times this process has been run. The run count can
be zeroed on the File >> DataLog screen.
Status: Displays error conditions and other status information.
Layer: Displays the current layer and the total number of layers in the active
process. Use the Next button on the Control Panel to select layers.