INFICON Guardian EIES Controller - Manual (Page 30)

2 - 6
IP
N 07
4-
51
7-
P1
D
Guardian Co-Deposition Controller Operating Manual
2.3.2 EIES Main Screen
Click the EIES-IV icon on your desktop (or click Start >> Programs >> INFICON
>> EIES-IV). Initially, your display may look slightly different than
Figure 2-3 .
Figure 2-3 Process Display
The EIES main screen shows operating controls for running your process in the left
Control Panel. Process status information is in the top Status Panel. Below the
Status Panel is the large Readings Panel where individual channel readings are
displayed.
The readings panel has three display modes: Process, Ratio and Readings. Click
View >> Process to see the Process display. The Process display shows process
related information such as films, setpoints, and manual operating controls.
The Ratio display is similar to the Process display except that the deviation
readings are replaced with the ratio of the channel’s reading to another channel.
The other channel number is shown below the ratio reading. Ratios are set up in
the Edit Layer dialog box. See
Ratio Display Grid on page 3-20 , for more
information on channel ratios.
Click View >> Readings to see the Readings display, Figure 2-4 . This display
shows unfiltered readings from all sensors and detectors. The Readings display is
useful for equipment setup and troubleshooting.
Control
Panel
Readings
Panel
Status
Panel