Eppendorf Galaxy CO2 Sensor - Manual (Page 98)

Stacking stand installation
Galaxy
® 170 R/170 S CO
2
Incubators
English (EN)
98
9. With four people, each using one of the lifting handles, lift the bottom incubator onto the stand, placing
the incubator feet into the stand’s guiderails (see Figure below).
Abb. 13-5: Lifting Handles And Guides For Incubator Feet
Fig. 13-5: Lifting Handles And Guides For Incubator Feet
10. Using a flat-bladed screwdriver, adjust the front castors until their rubber feet contact the floor (see
Figure below).
1 Incubator Lifting Handles 2 Guides For Incubator Feet