Eppendorf Galaxy CO2 Sensor - Manual (Page 36)

Operating controls and function for Galaxy 170 R Incubator
Galaxy
® 170 R/170 S CO
2
Incubators
English (EN)
36
disinfected prior to resumption of activity. For a full explanation of this feature, (see High temperature
disinfection option with oxygen control on p. 71).
6.5 DATALOGGER screen
The DATALOGGER screen displays the following information:
Abb. 6-4: DATALOGGER screen
Fig. 6-4: DATALOGGER screen
6.5.1 ALARM EVENTS
The following alarm events are recorded in the order in which they occurred, with the most recent event
displayed at the top:
• Power ON/OFF
• Chamber Temperature High/Low (programmed value)
• CO
2
Level High/Low (programmed value)
• CO
2
Supply Failure
• All System Alarms
• CO
2
Auto-Zero (A/Z) Adjustments
• CO
2
Auto Gain (A/G) Adjustments ( reserved for use by authorized service technicians only)
• Oxygen and Relative Humidity (R/H) Alarms (where these options are installed)
The capacity is 99 events, after which the earliest event is overwritten and a later event is added.
The date and the time are also recorded for each event, (see Fig. 6-5 on p. 37):