Eppendorf Galaxy CO2 Sensor - Manual (Page 100)

Stacking stand installation
Galaxy
® 170 R/170 S CO
2
Incubators
English (EN)
100
Abb. 13-7: Upper Stacking Frame Installation
Fig. 13-7: Upper Stacking Frame Installation
12. With four people, each using one of the lifting handles, lift the top incubator onto the upper stacking
frame, making sure to place a pad under each foot. Fit the incubator feet into the dimples on the upper
stacking frame (see Figure below).
Abb. 13-8: Incubator Into The Upper Stacking Frame
Fig. 13-8: Incubator Into The Upper Stacking Frame