Eppendorf Galaxy CO2 Sensor - Manual (Page 60)

Technical data
Galaxy
® 170 R/170 S CO
2
Incubators
English (EN)
60
10.2 Power supply
10.2.1 Mains/electrical supply
10.3 Fuses
10.4 Ambient conditions
10.4.1 Temperature management
• Digital programming via microprocessor control in 0.1 °C increments. Measurement of chamber and
door temperature via 6 RT (Resistance Temperature curve) matched thermistors (sensitivity 0.01 °C)
• Adjustable independent control of door heater
• “Out of Limits” temperature protection system independent of microprocessor control.
Mains/power connection 120 V, 50 Hz
120 V, 60 Hz
230 V, 50 Hz
230 V, 60 Hz
Power consumption for 120 V 1300 W
Power consumption for 230 V 1600 W
Energy to maintain 37 °C < 0.1 kWh
fuse for 120 V 10 A
fuse for 230 V 8 A
Ambient conditions 15 °C - 28 °C
Range 4 °C above ambient temperature to 50 °C
Control ± 0.1 °C
Stability ± 0.1 °C at 37 °C
Uniformity ± 0.3 °C at ambient 20°C - 25 °C
If ambient temperature is close to the programmed value, control settings may need adjusting.
Please consult Eppendorf Service for instructions.