Eppendorf Innova 43R Incubator Shakers - Manual (Page 77)

77
New Brunswick Operating manual
an optional line feed control character may also be included but must follow the carriage
return character.
When a command is sent that returns data, the characters returned are in ASCII format.
Each additional argument returned will be separated by the ASCII space or tab control
character; refer to the selected command for the actual format. Data returned is
terminated with a carriage return line feed control character sequence.
Section 12.3 provides an Index to the 2-character command codes.
Sections 12.4-12.7 provide command sets for your use for Set Commands, Profile
Control Commands, Report Request Commands and Set/Get Date & Time.
12.3 Index to Command Codes
Command Code Meaning
CL Command Grow Lamp
CS Command Speed
CT Command Temperature
CU Command UV Lamp
PC Clear Profile
PM Profile Mode
PR Read Profile Step in Memory
PS Profile Stop/Start
PW Write Profile Step to Memory
RI Report Software Version
RP Report Parameter List
RS Report Setpoint Values
RV Report Measured Values
=D Set Date and Time
?D Get Date and Time