Eppendorf Innova 43R Incubator Shakers - Manual (Page 46)

46
Innova 43 & 43R Incubator Shakers  M1320-0050 Operating manual
7.5.4 Editing a Program
Use the
Edit
function to open a program you have already created and saved, in
order to modify your settings following the same procedures.
7.5.5 Running a Program
Use the
Run
fuction to turn a specific program on. Naturally, only one program
can run at a time. When you change the mode to Run , the screen will show the
Run icon ( ):
Figure 25: Programs Screen – Running
PROGRAMS
Program 1 : Off
Program 2 : Run
Program 3 : Off
Program 4 : Off
PROG Fr 08:31
To stop a program: You can abort a run any time by changing the program’s
function to
Off .
7.6 Muting the Audible Alarm
The Innova 43/43R shakers have an audible alarm that is activated under predetermined
conditions (see Table 4). It may be muted in the following way:
1. Turn the Control Knob until the
SET screen is highlighted on the display. Click the
Knob in to work in this screen.
2. Turn the Knob to highlight the Mute mode (the default setting is Off , which means
the alarm is audible). To mute the alarm, click the Knob in. The field will flash.
3. Turn the Knob to change the setting to On , then click the Knob to save this selection.
4. To reactivate the audible alarm at any time, repeat steps 1-3, reversing Off and On .