Eppendorf Innova 43R Incubator Shakers - Manual (Page 63)

63
New Brunswick Operating manual
9.10 Replacement Parts
In Table 7 below you will find commonly needed replacement parts for your Innova
43/43R shaker:
Table 7: Replacement Parts
Part Description Quantity Part No.
Spare Parts Kit (includes 1 motor drive poly-V belt,
two each hinge assemblies, halogen bulbs, and
10A, 8A, & 3.15A fuses) 1 M1320-6000
Spare Parts Kit (includes 1 motor drive poly-V belt,
and two each 10A, 8A, & 3.15A fuses) 1 M1282-6000
Flask Clamp screws, 10-24 x 5/16-inch flat Phillips
head (+) 25 S2116-3051
Test Tube Rack screws, 10-24 x ½-inch pan head,
and washers (#10 plain and #10 lock washers) 10 each M1289-0800
Motor Drive Poly-V Belt, 28 inches long 1 P0700-7070
Fuse, 10A 1 P0380-3162
Fuse, 8A 1 P0380-3630
Fuse, 3.15A 1 P0380-3460
Chamber Light Bulbs 2 P0300-0470
UV Germicidal Bulb (if so equipped) 1 P0300-0351
Photosynthetic Bulb (if so equipped) 1 P0300-0221
UV Germicidal Light Ballast (if so equipped) 1 P0420-5113
Photosynthetic Light Ballast (if so equipped) 1 P0420-5192
9.11 Accessories
When ordering accessories, you may be asked to provide the model number and serial
number of your shaker. This information is on the electrical specification plate, located
on the rear panel of the shaker. The serial number is also labeled in the lower right
corner of the front panel, below the chamber lid seal.
9.11.1 Platforms
Table 8 lists the various solid 18- x 30-inch (45.7 x 76 cm) platforms available for
your Innova 43/43R. Consult Section 10.2 for load and speed graphs.
Table 8: Available Platforms
Description Part No.
Universal Platform M1250-9920
50 mL Erlenmeyer flask Dedicated Platform M1191-9908
125 mL Erlenmeyer flask Dedicated Platform M1191-9909
250 mL Erlenmeyer flask Dedicated Platform M1191-9910
...continued...