Eppendorf Innova 43R Incubator Shakers - Manual (Page 57)

57
New Brunswick Operating manual
Be sure to follow all the WARNINGS and the NOTE above as well as the procedure
outlined below when you replace the cabinet bulbs with reference to Figure 27 below:
Figure 27: Replacing Cabinet Lights
1. Make sure power is disconnected from the shaker.
2. Open the lid.
3. Wearing plastic gloves, remove the first used bulb, then carefully insert the new
bulb’s prongs fully into the connector base.
4. Repeat step 3 for the second bulb.
9.6 Replacing Optional Photosynthetic Lamps
WARNING!
Before removing or installing the photosynthetic “GRO” lamp, make sure power
is disconnected from the shaker.
To replace the photosynthetic GRO lamp bulbs, with reference to Figure 28:
1. Make sure power is disconnected from the shaker.
2. Open the lid.