Apple Cinema Tools 3 - Manual (Page 53)

Chapter 3 The Cinema Tools Interface 53
 Poster Frame: Assigns the currently displayed frame to the Detail View window’s
thumbnail display.
 Conform: Opens the Conform Clip dialog.
 Identify: Opens the Identify window.
 Clip Analysis: Opens the Clip Analysis dialog.
Reverse Telecine Dialog
You use the Reverse Telecine dialog to convert NTSC 3:2 pull-down video or 2:3:3:2
pul-down video to 24 frames per second (fps).
To open the Reverse Telecine dialog, do one of the following:
m Click Rev Telecine in the Clip window.
m Choose Clip > Reverse Telecine (available only when the Clip window is open).
See “ Reversing the Telecine Pull-Down ” on page 113 for details on using this function.
There is also a simplified form of the Reverse Telecine dialog that appears if the clip or
clips were captured from a DV camcorder that shoots 24P, such as the Panasonic
AG-DVX100 camcorder. These clips have the pull-down cadence (pattern) information
embedded in a way that Cinema Tools can read, so if it detects this cadence information,
the automated reverse telecine dialog appears. See “
Removing 2:3:3:2 or 2:3:2:3 Pull-
Down With Cinema Tools ” on page 190 for details.
UP01101.Book Page 53 Thursday, March 10, 2005 3:16 PM