Brady TLS 2200 User Manual
Page 91
TLS2200
T M
Thermal Transfer Printer User’s Guide
83
You have completed attaching the TLS2200
TM
printer to your PC and are now ready
to begin installing the software.
TLS2200 Printer Connected to a PC
Running the TLS2200
TM
Program Installer
Complete the following steps to run the TLS2200 Program Installer:
1.
Click Start à Programs à TLS2200 Installer à TLS2200.
2.
Once you see the TLS2200 Program Installer Introduction Screen, click Help to get
the latest step -by-step instructions for using the wizard.
Future Installations
In the future you may receive TLS2200
upgrade files either from the Brady Internet web
site or on a 3.5” disk. The extension for these files is .hex. Use the TLS2200 Program
Installer to install these files on your TLS2200 printer. Each time you receive a new .hex
file, repeat the above procedure beginning with Connecting the TLS2200 Printer to a PC.
Once you are in the wizard, you will be asked which .hex file you wish to install on your
TLS2200 printer. Click Change Program and use the Select Program File dialog box to