Brady TLS 2200 - Manual (Page 85)

TLS2200
T M
Thermal Transfer Printer User’s Guide 77
Note: The error message “Invalid Function” may appear while you are working with
legend lists. See Legend Lists on page 30 for details on working with lists. This error
message may have different causes depending on what you are trying to do. The following table
lists the different causes for this message as well as corrective action for each.
Error Message Cause Corrective Action
If you receive this
message while trying to
enter Edit mode, you do
not have a saved list.
Create a list.
See Legend Lists on page 30 for
instructions.
If you receive this
message while trying to
print, you are in Edit
mode.
Turn Edit mode off.
See Legend Lists on page 30 for
instructions.
If you receive this
message while trying to
print and you are NOT in
Edit mode, you do not
have an active list.
Create or activate a list.
See Legend Lists on page 30 for
instructions.
If you receive this
message while trying to
create a list, you are in
Edit mode.
Turn Edit mode off.
See Legend Lists on page 30 for
instructions.
If you receive this
message while trying to
delete a legend, you do
not have a recalled legend.
Recall the legend that you want to delete.
See Legend Lists on page 30 for
instructions.
Invalid Function
If you receive this
message while trying to
save a legend to a list,
you do not have an active
list. Create or activate a list.
See Legend Lists on page 30 for
instructions.