Brady TLS 2200 - Manual (Page 64)

56 TLS2200
T M
Thermal Transfer Printer User’s Guide
T10: Creating a Continuous Label
Note: This example assumes you have the continuous marker roll PTL-8-422
loaded in your printer.
Print the following label to be used to identify communications equipment:
Setup Status:
H Justify Left
V Justify Center
Rotation 0 Degrees
Format Component
Legend Type Text
1.
Press +
2. Press + to access the Setup Menu.
3. Press the <
?
> key three times to select Style, then press .
4. Press the <
?
> key once to select H Justify, then press .
5. Press the <
>
> or <
?
> keys to select Left, then press .
6. Press the button to exit back to the Setup Menu.
7. Press the <
>
> key once to select Continuous, then press .
8. Press the <
?
> key once to select Banner, then press .
9. Press the <
>
> or <
?
> keys to toggle the direction to Horizontal,
then press .
10. Press + to exit back to the Text Editor screen.
11. Enter BX1.10H2CC 10 Base T HUB TO 2ND FLOOR CALL
CENTER on line one.
12. Press .