Brady TLS 2200 - Manual (Page 54)

46 TLS2200
T M
Thermal Transfer Printer User’s Guide
8. Press or . The printer begins printing two each of the five
wiremarkers listed above.
T5: Creating a Label with Rotated Text, Printing Multiple Copies
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Label to be printed:
ROTATE
TEXT
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
1.
Check the Status Bar to make sure the unit is in Component mode. If not, press
+ to toggle from Wiremarker mode to Component mode.
2. Press +
3. Press + to access the Setup Menu.
4. Press <
?
> three times to move to the Style sub-menu, then press .
5. With the cursor highlighted on Rotation, press .
6. Press the <
>
> key once to select 90 Degrees.
7. Press .
8. Press + to exit back to the text editor screen.
9. Press + <
>
> once to increase the font size to 10.
10. Enter ROTATE on line one, then press .