Brady TLS 2200 - Manual (Page 62)

54 TLS2200
T M
Thermal Transfer Printer User’s Guide
T9: Creating a Patch Panel Label
Note: This example assumes you have the continuous marker roll PTL-8-422
loaded in your printer.
Label to be printed:
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
Legend Type Text
1.
Press + Clear> to delete all lines of text and reset
the font to the default value of 14.
2. Press + to access the Setup Menu.
3. Press the <
?
> key six times to select Units, then press .
4. Press the <
>
> or <
?
> keys to toggle the Units to Inches, then
press .
5. Press the <
>
> key four times to select Continuous, then press
.
6. Press the <
>
> key once to choose Terminal Block, then press
.
7. Use the <
>
> and <
?
> keys as needed to set the terminal block
repeat value to 0.60039 (15.25 mm), then press .
8. Press + to exit back to the Text Editor screen.
9. With the cursor highlighted on line one, press + <
>
> once
to increase the font size from 5 to 6.
10. Enter C012 on line one, then press .
11. Enter 01D on line two.
12. Press the <
=
> key twice.
13. Press + .