Brady TLS 2200 User Manual
Page 81
TLS2200
T M
Thermal Transfer Printer User’s Guide
73
Error Messages
Error Message
Cause
Corrective Action
Error in Checksum
The software was
improperly installed on
your TLS2200
TM
printer.
Contact Brady’s Technical Support Group.
Error Head Open
Print head is unlocked.
1.
Move the lever on the right side of the
TLS2200 printer to the lock position.
2.
Press the
button to clear the display.
Error No Label
Present
The TLS2200 printer is
not seeing the marker’s
smart cell located on the
side of the marker roll.
1.
Verify the smart cell is making contact
with the left material guide.
2.
Be sure the right material guide is
adjusted as far to the left as possible
for the roll of markers used. The
material guide should be locked into the
proper notch in the guide plate.
3.
Be sure the marker roll is snapped
evenly and firmly in the label roll
cradle.
4.
Press the
button to clear the display.
1.
Press the
button to clear the display.
2.
Install a new marker roll if the roll has
run out.
Error Out of Label
The roll of markers is
inserted properly in the
material guides, however,
they are either not
feeding properly or the
roll has run out of
markers.
If:
•
you have not run out of markers, the
markers are not feeding properly. Be
sure to insert the leading edge of the
markers into the material path until
they hit the feed roller. Be sure the
leading edge of the marker is straight. If
not, cut the edge with a pair of
scissors.
•
the markers are present and printing,
they may have become skewed or
jammed. To fix, press the
to recalibrate or open the print head
and pull the markers through to clear
the jam.