Brady TLS 2200 User Manual

Page 17

TLS2200

T M

Thermal Transfer Printer User’s Guide

Then, while still holding it down , press the second key.

Accented

Characters

To place an accent mark over a vowel, type the mark first
followed by the letter itself. (Note: The tilde (~) is to be used
with the letters A,a or N,n only.)

The LCD displays two lines of text with 16 characters on each line. The first line always
displays the status bar, which includes font and character positioning information (see
below).

As you type characters, they appear on the liquid crystal display (LCD) at the cursor’s
position. Depending on the installed marker size and font size selected, you can have up to
23 lines on a single label and 50 characters on a single line. The cursor marks your current
typing or editing position.

If you are entering more than 16 characters on a line, you can not see the entire label until it
is printed. The arrow keys allow you to move the cursor around the LCD. As the cursor
moves beyond the 16

character, the screen scrolls to display the remaining text for the

label line:

TLS2200 THERMAL_

LABELING

SYSTEM

The status bar indicates the
cursor is located at the 16

character position

As you continue to enter text, the
screen scrolls to allow the entry of
the remaining text (underlined M is
at cursor position 31).

Line No.

Font Size

(1-19)

Horizontal
Character
Position

Legend Type

(Text, Barcode)

Label Format

(Component, Wire)