Brady TLS 2200 User Manual
Page 43
TLS2200
T M
Thermal Transfer Printer User’s Guide
35
later in this section for details.
Using Edit Mode
The Edit mode can be toggled to on or off. Use the Edit mode within the List Menu to
modify a list when:
•
a part is not installed in the printer.
-or-
•
a part other than the part the list was created for is installed in the printer.
To use Edit mode, follow the instructions below:
1.
Press to activate the List Menu.
2.
Press the <
?> key three times to select Edit, then press
3.
The Edit mode defaults to Off. Use the <
?> key to select On, then press
4.
You will be prompted with all list names stored in the printer (up to 10). Use the
<
>> and keys to select the list you want to edit, then press