Brady TLS 2200 - Manual (Page 65)

TLS2200
T M
Thermal Transfer Printer User’s Guide 57
T11: Creating a Banner Label of Fixed Length
Note: This example assumes you have the banner marker roll PTL-43-439OR
loaded in your printer.
Print the following label to be used to identify an electrical conduit:
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
Legend Type Text
1.
Press + Clear> to
delete all lines of text and reset the font
to the default value of 19.
2. Press + to access the
Setup Menu.
3. Press the <
?
> key six times to select
Units, then press .
4. Press the <
>
> or <
?
> keys to toggle the
Units to Metric, then press .
5. Press the <
>
> key four times to select
Continuous, then press .
6. Press the <
?
> key once to select Fixed
Length, then press .
7. Use the <
>
> and <
?
> keys as needed to
set the fixed length repeat value to
143.000mm (5.62992 inches), then
press .
8. Press + to exit back to
the Text Editor screen.
9. Enter 220 VOLTS on line one.