Brady TLS 2200 User Manual

Page 30

TLS2200

T M

Thermal Transfer Printer User’s Guide

(example, font size set at 8 for line one, press to add line two, font size remains
at size 8). The font size remains at the size you choose until you decide to change it.

Changing the Font Size

At any time during the text entry or editing process, you can change the font size for the
label line displayed on the text editor screen. This can be done on a line-by-line basis only.
To change the font size for a given line, simply press + <

>> or +

respectively to increase or decrease the font size.

Selectable font sizes range from 1 (4 point) to 19 (72 point). The maximum font size
selectable for a particular label line depends on several factors including marker size,
number of characters of text entered on the label line, number of lines of text entered on the
label, and the font sizes chosen for the other label lines.

If at any time you attempt to enter too many characters on a label line, the message
“Reduce Type Size” flashes on the display. To allow more characters to fit on the line,
press + <

?> to decrease the font size.

Text already entered on a line can be switched from text to barcode mode and vice versa. If
the size of the barcode, or text being switched to, does not fit on the marker, you encounter
the message “Reduce Type Size” when you attempt to print the label. You must scroll to
the line where the switch was made, reduce the size of the font (if text) or bar height (if a
barcode), and print again.

If you press the key and it no longer moves the cursor down to another line, you
have attempted to enter more lines on the label than can fit. To add more lines, press
+ <

?> to decrease the font size of the existing lines.

TLS2200

Printer Fonts

The following fonts are available on the TLS2200 printer:

FONT
NUMBER

POINT
SIZE

PRINT SAMPLE

BRADY 12345