Brady TLS 2200 - Manual (Page 46)

38 TLS2200
T M
Thermal Transfer Printer User’s Guide
Continuous Printing—Banners
You can create banners using the TLS2200
TM
printer. Banners have a variety of industrial
uses, including labeling larger conduit.
New continuous label parts designed for banner printing such as PTL-8, PTL-42,
and PTL-43 can only be used with version 2 software or higher. If you are using
version 1 software, you will not be able to enter text on the editor screen. Refer to
Appendix 3: Using the TLS2200
 Program Installer for help with installing new software
on your TLS2200 printer.
To create a banner, complete the following steps:
1.
Press the + keys to access the Setup Menu.
2. Press the <
?
> key twice to select Continuous, then press .
3. Press the <
?
> key once to select Banner, then press .
4. Use the <
>
> and <
?
> keys to select the desired rotation, then press .
5. Press + to exit back to the Text Editor screen.
6. Enter the banner text as needed and print your label. The first banner label printed
will have an additional 1” of material fed before the text prints. After the first banner
label prints, press and then cut to avoid excess waste on subsequent labels.
Banner Rotation
Banners can be printed either horizontally or vertically.
220 VOLTS
2
2
0
V
O
L
T
S
Horizontal Banner Vertical Banner