Brady TLS 2200 - Manual (Page 73)

TLS2200
T M
Thermal Transfer Printer User’s Guide 65
(0.31496 in.), then press .
10. Press the <
?
> key once to select Human Readable, then press .
11. Press the <
>
> or <
?
> keys to toggle the human readable text ON, then press
.
12. Press the <
>
> or <
?
> keys as needed to set the font size to 6, then press .
13. Press + to exit back to the Text Editor screen.
14. With the cursor highlighted on line one, press + <
>
> two times to increase
the font size from 9 to 11.
15. Enter BRADY on line one, then press .
16. Press the key to toggle the Legend Type for line two from Text to
Barcode mode (B is displayed on the Status Bar).
17. Enter A101 on line two.
18. Press +.
19. Press to clear text from line 2 only.
20. Enter B101 on line two.
21. Press +.
22. Turn the battery power switch off to deactivate List4.
To select (recall) List4 as the active list:
1. Turn the battery power switch on.
2. Press .
3. With the cursor on Select, press .
4. Use the <
>> and arrows to select List4, then press . The part number
appears, followed by the Text Editor screen. List4 is now the active list.
5. Press .
6. Press the <
?> key twice to select Print, then press .
7. When the “No. of Copies?” prompt appears, enter 1, then press .