Brady TLS 2200 - Manual (Page 51)

TLS2200
T M
Thermal Transfer Printer User’s Guide 43
T2: Creating a Component Label Utilizing Multiple Font Sizes
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Label to be printed:
MULTIPLE
FONT
SIZES
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
1. Press to clear the text from line one.
2. With the font size set at the default of 9, enter MULTIPLE on line one, then press
.
3. Press + <
>
> three times to increase the font size to 12.
4. Enter FONT on line two, then press .
5. Press + <
?
> eight times to decrease the font size from 12 to 4.
6. Enter SIZES on line three.
7. Press .