Brady TLS 2200 - Manual (Page 39)

TLS2200
T M
Thermal Transfer Printer User’s Guide 31
•
A maximum of 10 legend lists can be stored in the printer at any one time.
The List Menu
To bring up the List menu, press on the keypad. The List menu contains the
following user options:
Option Description
Select Activates a list for editing or printing.
Create Creates a new list.
Print Prints a list.
Edit Toggles either on or off. Edits a list when:
•
a part is not installed in the printer.
-or-
•
a part other than the part the list was created for is installed
in the printer.
Delete Deletes a list from memory.
Creating a New List
To create a new list, follow the instructions below:
1. Press to access the List Menu.
2. Press the <
?> key once to select Create, then press .
If the error message “Memory Full” displays on the Text Editor screen, the maxium
number of lists (ten) is already saved in memory. In order to proceed, you must delete one
or more lists from memory. Refer to Deleting a List later in this section for instructions.
3. At the prompt “Enter List Name”, enter a name for your new list, then press
. A list name of up to 16 character is allowed. All the characters on the
keypad are valid for list names.
4. At the prompt “Enter Part No.”, enter the entire part number as it appears on the end
of the marker roll core. For example, PTL-19-423.
5. Press . The Text Editor screen appears.
The list is created specifically for the part number entered at the time the list was
created. You cannot create a list unless a marker roll is loaded.
6. Enter text to create the first legend for your list.
7. Press + to save your legend to the list.
If the error message “Memory Full” displays on the Text Editor screen, the memory has
reached capacity. In order to proceed, you must either delete one or more legends from a