Brady TLS 2200 User Manual
Page 83
TLS2200
T M
Thermal Transfer Printer User’s Guide
75
Error Message
Cause
Corrective Action
If you receive this
message when you press
exceeded the marker
height. This occurs when
font sizes are increased
between lines of text, or
you have chosen a bar
code height that is too
tall.
Reduce the font size or bar code height and
press
If you receive this
message when trying to
create a list, there are ten
lists (the maximum)
already saved in memory,
or the memory has
reached capacity.
Delete one or more lists.
Memory Full
If you receive this
message while trying to
save a legend to a list, the
memory has reached
capacity.
Delete one or more lists or legends.
Wrong Part! Use
PTL-XX-XXX
If you receive this
message while trying to
select a list, and Edit
mode is off, either:
•
there is no part loaded in
the printer.
-or-
•
you have the wrong part
loaded in the printer.
The wrong part is a part
other than the one the list
was created for.
Load the correct part in the printer. The
correct part is the part that the list was
created for.