Brady TLS 2200 User Manual
Page 44
36
TLS2200
T M
Thermal Transfer Printer User’s Guide
The Text Editor screen appears. The left and right arrows on the Status Bar (top line of
the screen — see below) are replaced by lighting bolts to indicate that the Edit mode is on.
When in Edit mode, the Print, Feed, and Peel commands are disabled. Turn the Edit mode
off to restore these functions.
The Edit mode toggles to Off when the printer is turned off.
Appending a List
To append a list means to add legends to a previously saved list. All legends are appended
to the end of the list. You cannot save legends to the beginning or middle of a list.
1.
If you do not have a list active, select a list. Refer to Selecting a List earlier in this
section for instructions.
2.
Create a legend following the normal guidelines for non-list legends.
3.
Press
4.
When the prompt appears “Save as New” or “Save as Current”, select “Save as
New”. Your legend is now added to the end of the list.
Deleting a List
To delete a list from memory, follow the instructions below:
1.
Press to activate the List Menu.
2.
Press the <
?> key four times to select Delete, then press
prompted with all the list names stored in the printer (up to 10).
3.
Use the <
>> and keys to select the name of the list you want to delete, then
press
~
01~~14~~CT~~01~
Text Editor screen with
Edit mode on.