Brady TLS 2200 - Manual (Page 53)

TLS2200
T M
Thermal Transfer Printer User’s Guide 45
T4: Creating Serialized Wiremarkers
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Labels to be printed:
A201
A201
A201
A201
.
.
.
.
A205
A205
A205
A205
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Wire
1. Press to clear the text from line one.
2. Check the Status Bar to make sure the unit is in Wiremarker mode. If not, press
+ to toggle from Component mode to Wiremarker mode.
3. Enter A201 on line one.
4. Press <
=
> to position the cursor under the last character.
5. Press + .
6. When “No. to Serial?” prompt appears, enter 5, then press .
7. When “No. of Copies?” prompt appears, enter 2.