Brady TLS 2200 - Manual (Page 42)

34 TLS2200
T M
Thermal Transfer Printer User’s Guide
Wrong Part! Use
PTL-XX-XXX
This message will also display if you are trying to save a legend to an active list, and the
wrong part (a part other than the part the list was created for), or no part, is loaded in the
printer.
If you do not remember the correct part for the list you want to edit, place the
cursor on your list name (after choosing Select), then press the <
<> key. The
correct part displays on the Text Editor screen, providing that you entered it when you
created the list. See Creating a List earlier in this section. Press the <
=> key to return to
the list name.
In order to delete or edit a legend in a list, you must recall the legend. When you activate a
list, the last legend you entered will display on the Text Editor screen. However, this does
not mean that the legend is recalled.
2. Recall a legend from the active list.
•
Press + to recall the next legend in a list.
•
Press ++ to recall the previous legend in a list.
If you want to delete a legend:
Press ++. The legend is deleted from the active list.
If you want to change characters in a legend:
1. Edit the legend following the normal guidelines for non-list legends.
All style options for editing non-list legends can be used to edit legends within a list,
and different legends can have different styles even though they belong to the same
list. Style options include:
•
H Justify
•
Font Size
•
V Justify
•
Rotation
•
Format
2. Press + to save the edited legend.
3. When the prompt appears “Save as New” or “Save as Current”, select “Save as
Current”. Your edited legend is now saved to the list.
Selecting “Save as New” will add the legend to the end of the list. See Appending a List
The part your list
was created for.
This message will only display
if the Edit mode is off.